There were several T1 Cunningham variants and I going to make them all. The first T1 variant was made in 1927
T1E1 Cunningham (1928)
T1E2 Cunningham (1929)
↧
T1 Cunningham variants
↧
T1 Cunningham progress report
Started making first T1 Cunningham variant. Here is basic hull and turret alongside with 15mm Little Willie There are LOTS and LOTS of work to do :) Final model should look like this one:
![]()
↧
↧
T1 Cunningham progress report - part2
Hull and turret 98% done and tracks are to be done. Please note that's this is very small vehicle - only 3,8cm long, so I made rivets and harches a bit bigger. Rivets are 1/3 of mm, the same size as on Zvezda's Panzer 38(t). Little Willie is 5,8cm long, similar to Plastic Soldier Company SdKfz 251.
After finishing early T1 Cunningham version, I will be making T1E1 and E2 variant with more detailed hull, different turret and bigger gun.. This is how later version of T1 looks in World of Tanks.
↧
T1 Cunningham progress report - part2,5
10 minutes of modeling and hull is done! I plan to finish tracks tomorrow morning. For this picture I included early T1 hull and turret with single gun and also separate T1E1 turret wit short gun and machine gun.
PS. Tomorrow I will also remodel all radiators on both vehicles. I tried to make radiators a bit cartoony, so it will look good in 15mm (model is only 3,8 cm long), but I changed my mind, because the look so bad..
PS. Tomorrow I will also remodel all radiators on both vehicles. I tried to make radiators a bit cartoony, so it will look good in 15mm (model is only 3,8 cm long), but I changed my mind, because the look so bad..
↧
Started working on 15mm LK-II
I started working on 15mm scale LK-II tank. I just finished base hull and will be adding details soon. There is LOTS and LOTS of work to do. On photo above you can see finished 15mm Little Willie, 80% finished T1 Cunningham (I will add tracks soon) and very raw LK-II. LK-II have same size as Renault FT-17, similar weapon and armor, but much faster (14-18 km/h against 7 km/h)
Finished model will look like this:
↧
↧
15mm T1 Cunningham FINISHED!
ITS FINISHED!
T1 and Litle Willie size comparison. T1 is 3,8cm long and Willie is 5,87cm long
CHARGE!
↧
T1 Cunningham ready for print :)
Made some final touches to the model, so it can be printed and assembled :)
↧
Ford 3-Ton M1918
Just finished another US light tank of WW1 and Interwar period. This time its Ford 3-Ton M1918 light tankette.
Design on the 3-ton tank started in mid-1918, before which American tank forces had been largely equipped with British or French examples. The 3-Ton was a two man tank designed so that American forces could use another tank besides the Renault FT in battle, and was in fact designed around the FT but as a cheaper alternative. Its two Model T ford engines were controlled from the driver- seated at the front- with a gunner beside him who had control of a 7.62mm machine gun on a limited-traverse mount. The initial production run of the 3-ton was of fifteen vehicles, one of these was sent to France for testing. A contract for 15,000 of these vehicles was awarded; however, the U.S tank corps felt it did not meet the requirements they wanted. The contract for the 15,000 tanks was ended by the Armistice, leaving only the fifteen original vehicles produced.
CHAAARGE!
↧
Ford 3-Ton Ready for print!
Its ready for print. By the way I added some details on tracks.
↧
↧
T1, T1E1 and T1E2 Cunningham!
Six pieces and three Cunningham variants!
↧
LK-II progress report
↧
Whats on the Workbench?
Bunch of half painted QRF models. M60A1 Patton (only turret is finished), RKhM "Kashalot" and Char 2C. Sorry for poor lighting :) Its rainy outside.
↧
My Laurie is happy!
My Laurie is happy!
↧
↧
My Laurie is sleeping!
My Laurie is sleeping!
↧
15mm M60A1 from QRF Part 1 - Half Painted
Half painted M60 from QRF in MERDC camouflage. Only turret is finished, so don't bother half painted hull and ugly tracks.
Finished M60A1 turret in MERDC camouflage.
↧
20% finished Char2c and Rkhm Kashalot
↧
Minifigs Austrian Cuirassier
Just painted 15mm Napoleonic era Austrian Cuirassier. I got ten of them year ago from one of TMP forum user. They were unpainted so I was not sure about their nation and uniform colour. I even created a topic to identify these chaps http://theminiaturespage.com/boards/msg.mv?id=242333
↧
↧
15mm Grenadier Guard
15mm Grenadier Guard. Originally its a Peter Pig British sergeant with Grenadier hat made from greenstuff.
↧
Colonial British rebased
↧
Started rebasing my Insurgents
Started rebasing my Insurgents on 15mm clear acrylic bases from Litko
↧